Applications

The pressure-activated sealant technology was originally developed in 1995 to seal leaks in the hydraulic systems of control lines and SCSSVs. Since then, the technology has been expanded to cure leaks in over 1500 operations. 

This state-of-the-art proprietary solution, which is compatible with both oil and glycol-based hydraulic fluids, solidifies only at the high point of differential pressure, so only the leak is sealed. Any excess sealant remains inert, in a liquid form, and will not clog the hydraulic system or other equipment.The environmentally approved sealant can be left in the system indefinitely or flushed out.

Some of the successful applications include the following:
Click on the links to view our new animations

DYNAMIC SEAL LEAKS

  • Seal Units
  • Safety Valves [View]
  • Sliding Sleeves
  • Packers
  • Hangers [View]
  • Wellheads and Trees

STATIC SEAL LEAKS

CONNECTION LEAKS

  • Compaction
  • Cement Composition [View]
  • Stress & Thermal [View]

MICROANNULUS LEAKS

  • Pinholes
  • Weld Defects
  • Internal Corrosion
  • Gate & Ball Valves
  • Pipeline Swivel Connections
  • Emergency Disconnect Assemblies

PIPELINE LEAKS

SUBSEA EQUIPMENT

  • Actuators [View]
  • Manifold Hardware
  • Riser/Tree Cap Release Mechanisms
  • Flowline Hubs
 
CONTACT US
AllUsesCollage-320x

Seal-Tite® sealant can be used in the harshest operational environments and will maintain its sealing integrity up to 500º F and to 22,000 psi.

copyright 2007  Seal-Tite International

 
[HOME] [OVERVIEW] [APPLICATIONS] [DELIVERY METHODS] [FAQs] [SUCCESS RATES]
 

site designed by XL TECHNOLOGIES, INC